COVID-19 UPDATE We are open with limited hours and staff.
Sale !
/

Balanced Aire Non-Powered Self Adjusting Convertible Mattress

$1,660.00-$1,680.00$2,380.00-$2,400.00

Item # BA9600-NP
UPC # 822383516998

N/A

Description

FEATURES/BENEFITS

  • Versatile reactive mattress replacement system with self adjusting air/foam cells provides outstanding pressure redistribution and shear/friction reduction
  • Designed to prevent, treat and heal pressure ulcers in the home or long term care setting
  • Add an alternating pressure pump and the Balanced Aire easily converts to a dynamic powered system
  • 2.5″ Hybrid Visco foam top layer provides immersion, premium comfort and heat dissipation
  • High density foam perimeter provides firm edge support and facilitates safe patient transfers
  • Heel slope redistributes pressure away from vulnerable heels
  • Self-adjustment can be open cell or closed cell to meet individual needs
  • Self-Adjusting air cells recognize body weight and pressure and adjust to reduce interface pressure and improve patient comfort
  • Eight non-circular cylinders prevent “rolling” or “gapping”
  • Removable 4 way stretch PU cover is fluid resistant, low shear and vapor permeable helping protect the skin from friction and moisture
  • Arrives patient ready easy to deliver, set up and transport
  • Foam and cover are antimicrobial, antifungal, and latex free
  • Meets flammability standards CFR1632 and CRF1633

SPECIFICATION

Control Unit AirflowWhen Used w/Power Source (P) 4 LPM
Control Unit AlarmsN/A
Control Unit Cycle TimeWhen Used w/Power Source (P) 5 Minutes
Control Unit TypeWhen Used w/Power Source (P) Compressor
Mattress Cover MaterialFluid-Resistant Stretch
Warranty5 Year Limited Mattress | 1 Year Control Unit
Weight Capacity35″ W 500 lbs, 42″ W 700 lbs

Additional information

PRODUCT DESCRIPTION

Non-Powered Self Adjusting Air/Foam Mattress, Powered alternating Pressure Air/Foam Mattress

PRODUCT Dimension

35" (W) x 80" (L) x 7" (H), 35" (W) x 84" (L) x 7" (H)

Reviews

There are no reviews yet.

Be the first to review “Balanced Aire Non-Powered Self Adjusting Convertible Mattress”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBalanced Aire Non-Powered Self Adjusting Convertible Mattress removeHome Bed Assist Handle removeCompetitor II Hi/Lo Height Adjustable Bed removeStandard Telescoping Full-Length Side Rail, Brown-Vein Finish removeFull-Electric Bariatric Bed, 48" removePrime Plus Care Bed Model P750 remove
NameBalanced Aire Non-Powered Self Adjusting Convertible Mattress removeHome Bed Assist Handle removeCompetitor II Hi/Lo Height Adjustable Bed removeStandard Telescoping Full-Length Side Rail, Brown-Vein Finish removeFull-Electric Bariatric Bed, 48" removePrime Plus Care Bed Model P750 remove
ImageHome Bed Assist HandleCompetitor II Hi/Lo Height Adjustable BedThe Standard Telescoping Full-Length Side Rail, Brown-Vein Finish is constructed of 1-inch steel with a brown vein finish that is strongFull-Electric Bariatric Bed, 48Prime Plus Care Bed Model P750
SKU
Rating
Price

$1,660.00-$1,680.00$2,380.00-$2,400.00

$90.00$130.00

$750.00-$750.00$1,070.00-$1,070.00

$50.00$70.00

$5,500.00-$5,500.00$7,850.00-$7,850.00

$2,400.00$2,520.00

Stock
Availability
Add to cart

DescriptionItem # BA9600-NP UPC # 822383516998Item # 15064 UPC # 822383126470Item # 15571 UPC # 822383963570Item # 15001ABV UPC # 822383179490Item # 15302 UPC # 822383180854Item # P750
Content

FEATURES/BENEFITS

  • Versatile reactive mattress replacement system with self adjusting air/foam cells provides outstanding pressure redistribution and shear/friction reduction
  • Designed to prevent, treat and heal pressure ulcers in the home or long term care setting
  • Add an alternating pressure pump and the Balanced Aire easily converts to a dynamic powered system
  • 2.5" Hybrid Visco foam top layer provides immersion, premium comfort and heat dissipation
  • High density foam perimeter provides firm edge support and facilitates safe patient transfers
  • Heel slope redistributes pressure away from vulnerable heels
  • Self-adjustment can be open cell or closed cell to meet individual needs
  • Self-Adjusting air cells recognize body weight and pressure and adjust to reduce interface pressure and improve patient comfort
  • Eight non-circular cylinders prevent "rolling" or "gapping"
  • Removable 4 way stretch PU cover is fluid resistant, low shear and vapor permeable helping protect the skin from friction and moisture
  • Arrives patient ready easy to deliver, set up and transport
  • Foam and cover are antimicrobial, antifungal, and latex free
  • Meets flammability standards CFR1632 and CRF1633

SPECIFICATION

Control Unit AirflowWhen Used w/Power Source (P) 4 LPM
Control Unit AlarmsN/A
Control Unit Cycle TimeWhen Used w/Power Source (P) 5 Minutes
Control Unit TypeWhen Used w/Power Source (P) Compressor
Mattress Cover MaterialFluid-Resistant Stretch
Warranty5 Year Limited Mattress | 1 Year Control Unit
Weight Capacity35" W 500 lbs, 42" W 700 lbs
The Home Bed Assist Handle Helper Handle provides assistance in getting in and out of your home style bed. You don't have to worry about the fit since the handle is attached to both sides of the bed. It simply slides under the mattress and includes an added feature over the base tape, a "non-slip foam" that helps hold the tape in place. The Home Bed Assist Handle is part of a chrome-plated steel construction that is sturdy, solid, and easy to clean. The unit is up to three pieces and can be assembled quickly and tool-free, and also adjusts flat for easy storage.

FEATURES/BENEFITS

  • Assistance for getting in and out of bed
  • Can be used on either side of the bed (Figure A)
  • Removable handle
  • Easy, quick, no tool assembly Comes in two pieces
  • Safety strap wraps around mattress or box spring to ensure a secure fit
  • Special extra-long safety strap enables user to be in a single, twin, double, queen or king size bed
  • Made of powder coated steel for long life and easy cleaning
  • Handle with multiple crossbars creates easy grip for any height use
  • Retail Packaged

SPECIFICATION

Rail Dimensions11.5" (W) x 20.75" (H) x 21.5" (D)
WarrantyLimited Lifetime
Weight Capacity250 lbs
The Competitor II Hi/Lo Height Adjustable Bed comes with four moving wheels to move the bed with ease. The hand collar provides electrical adjustment of the leg rest and back support with just the push of a button. This handmade necklace glows in the dark, making it easy to find at night as well as easy to read adjustment buttons. A lock feature is also provided to prevent accidental adjustments. During power outages when electricity is not available, a 9V battery can provide emergency power to lower the head and foot clips. The Competitor II Hi/Lo Height Adjustable Bed can be adjusted using a detachable hand crank. This crank uses a convenient positive hexagonal connection for an easy connect or disconnect job.

FEATURES/BENEFITS

  • #15571 Hand Crank adjustable bed height features a NEW positive fit hexagonal crank connection making it easy to raise and lower bed height for patient comfort, ease of entry/egress and patient care accessibility
  • Large glow in the dark hand pendant has easy-to-use controls for adjusting head and foot deck sections to comfortable positions built in battery backup and power indicator light. NEW Lock out feature can be used to prevent accidental actuation of head or foot adjustment
  • In the event of a power failure, a 9 volt battery (not included) located in the hand pendant can lower the head and foot sections to a horizontal position. Two additional Batteries can be installed into the motor housing to increase adjustment speed and extend battery life. No crank needed
  • Slat Deck provides strength, no-sag mattress support, no links to connect, easy to clean
  • Patient weight capacity is 350 lbs. Total weight capacity 450 lbs. evenly distributed. Includes occupant, mattress, side rails, trapeze, accessories, personal affects, etc.
  • Ultra light head and foot frame weigh only 41 lbs. each making one person transport and assembly easy
  • #15571 Competitor II Crank Hi/Lo Hgt Adj. Bed frame only with casters
  • Full and Half Rails meet IEC Entrapment guidelines when used on the #15561/15571 beds and are backward compatible for use with the #15560 & 15570 Competitor beds
  • Product Safety Standards: Meets IEC 60601-2-52 60601-1 60601-1-2 60601-1-11

SPECIFICATION

Bed HeightLow Hgt 15 " / Hi Hgt 22.5 "
Carton Shipping Weight163 lbs. (74 kg)
Unit Dimensions35.6 " (W) x 87.2 " (L) | 37 " (W) x 87.2 " (L)
Waranty(Original Purchaser) 5 Years on Motor and Hand Control, Limited Lifetime on Welds and Frame, 1 Year on All Other Parts and Components
Weight146 lbs. (66.2 kg)
Weight Capacity350 lbs. (158.8 kg) Patient Wgt 450 lbs. (204 kg) Total Wgt Includes occupant, mattress, side rails, trapeze, accessories, personal affects, etc.)
Bed Height Min w casters15"
Bed Height Max w casters22.5"
The Standard Telescoping Full-Length Side Rail, Brown-Vein Finish is constructed of 1-inch steel with a brown vein finish that is strong and attractive. Easily adjusts up or down with spring-loaded release and fits most hospital or homecare beds to help prevent patient from falling out of bed. Spring loaded crossbars are easy to install and remove. Telescopes with bed movement to provide adequate support. Includes two Standard Telescoping Full-Length Side Rail, Brown-Vein Finish with two crossbars.

FEATURES/BENEFITS

  • Attractive brown-vein finish (Figure A - B)
  • Constructed of 1" steel
  • Telescopes with movement of bed
  • Easily adjusts up or down with spring-loaded release
  • Spring-loaded crossbars are easy-to-install and remove (Figure C)

SPECIFICATION

WarrantyLimited Lifetime
With a heavy-duty steel frame and an Full-Electric Bariatric Bed, 48" sleeping surface, this electric obesity bed from Drive Medical ensures strength and safety. This sturdy product can handle a weight capacity of up to 750 pounds, and features an extra wide 48" surface that is much larger than a traditional bed . Manual control built into this Full-Electric Bariatric Bed, 48" bed offers multiple bed positions, with a split design that operates smoothly and quietly, adjusting the patient to the appropriate position with little fuss. A hand crank is included in case of emergency. Upon arrival, the bed and removable bed ends can be assembled without tools.

FEATURES/BENEFITS

  • Quiet, smooth operation
  • Heavy-duty frame ensures strength and patient safety
  • All steel construction
  • Larger sleep surface than conventional bed
  • Split-pan design with removable bed ends is easy to set up
  • No tools necessary for set up
  • Hand control (included) provides for multiple bed positioning for patients
  • Emergency manual crank included
  • Low air loss/alternating pressure mattress available
  • "T" rails available (Sold separately) (Figure A)
  • Weight Capacity 750 lbs

SPECIFICATION

Bed Height18.25" - 26.25"
Carton Shipping Weight343 lbs.
Unit Dimensions48" (W) x 88" (L)
Warranty(Original Purchaser) Limited Lifetime on Welds, 5 Years on Frame, 1 Year on All Other Parts and Components
Weight312 lbs.
Weight Capacity750 lbs
Bed Min height18.25"
Bed Max heigth26.25"
The Prime Plus Care Bed Model P750 is a flexible patient bed designed to accommodate bariatric users with adjustable width and length. This bed weighs 750 lbs. weight capacity. The bed has a built-in push-button width expansion from 39 to 48 to accommodate a wide range of mattress sizes and types. The all-steel frame with no sagging bottom surface construction provides superior strength, durability, and greater mattress support. The Prime Plus Care Bed Model P750 bed can be used for patients at home or in the facility. 3-function full electric start with quiet electric actuators.

SPECIFICATION

Built-in Width Expansion39", 42", 48"
Height range11"-30"
One Step LockingYes
Sleep Surface80" - 84" - 88"
Warranty15 Year on Frame, 5 Year on Electrical and Mechanical. Lifetime on All Welds
Weight Capacity750 lbs
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
PRODUCT DESCRIPTION

Non-Powered Self Adjusting Air/Foam Mattress, Powered alternating Pressure Air/Foam Mattress

PRODUCT Dimension

35" (W) x 80" (L) x 7" (H), 35" (W) x 84" (L) x 7" (H)

PRODUCT DESCRIPTION

Competitor II Hi/Lo Hgt Adj. Bed with Full Rail, Competitor II Hi/Lo Hgt Adj. Bed with Full Rail, Fiber Mattress, Competitor II Hi/Lo Hgt Adj. Bed with Full Rail, Innerspring Mattress, Competitor II Hi/Lo Hgt Adj. Bed with Full Rail, Therapeutic Mattress, Competitor II Hi/Lo Hgt Adj. Bed with Half Rail, Competitor II Hi/Lo Hgt Adj. Bed with Half Rail, Fiber Mattress, Competitor II Hi/Lo Hgt Adj. Bed with Half Rail, Innerspring Mattress, Competitor II Hi/Lo Hgt Adj. Bed with Half Rail, Therapeutic Mattress, Competitor II Hi/Lo Hgt Adj.Bed

PRODUCT DESCRIPTION

Bariatric Bed

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare